60″ X .250″ X 10″ Paxson Slitting Line W/Automatic Strapping

Listing description

Material: HRS, CRS, HRPO, Galvanized / Maximum Strength: 50,000 PSI Shear, 40,000 PSI Yield
Thickness: .015″ – .250″
Coil Weight Capacity: 40,000 lbs.
Coil Width (Maximum): 60″ Trimmed, 62″ Untrimmed
Coil I.D.: Entry: 20″ – 24″ / Exit 20″
Coil O.D.: Entry: 42″ – 72″ / Exit: 42″ – 72″
Line Speed: Two-Speed, 130 and 390 FPM @ bare drum
Line Direction: Right to Left
Mode of Operation: Pull-Thru & Drive Assist
Slitter Cut Capacity:
Distance Between Collars
32″ 38″ 44″ 50″ 56″ 62″
Gauge 130 FPM 390 FPM 130 FPM 390 FPM 130 FPM 390 FPM 130 FPM 390 FPM 130 FPM 390 FPM 130 FPM 390 FPM
.250″ 17 – 17 – 17 – 17 – 14 – 11 –
.218″ 22 – 22 – 22 – 22 – 16 – 12 –
.187″ 30 3 30 3 30 3 25 3 19 3 15 3
.156″ 30 6 30 6 30 6 30 6 23 6 17 6
.125″ 30 11 30 11 30 11 30 11 29 11 22 11
.078″ 30 30 30 30 30 30 30 30 30 30 30 30
.062″ 30 30 30 30 30 30 30 30 30 30 30 30
.050 30 30 30 30 30 30 30 30 30 30 30 30
EQUIPPED WITH:
Entry Coil Car:
• S/N 11700-1
• L-Type
• Self-Contained Hydraulic Power Unit
• Hydraulic Lift & Travel
Uncoiler:
• S/N 11700-3-4-82
• Hydraulic Expansion: 20″ – 24″
• 4-Segment Pumpkin Tooth Mandrel
• Powered Overarm Hold-Down
• Slide Base
• Hydraulic Motor Feed-up
• Water Cooled Brake

Hydraulic Peeler Table:

• S/N 11700-2-3-82
Slitter Entry Unit:
• Driven Pinch Rolls
• Independent Manual Adj. Roller Side Guides
• Roller Crop Shear
Slitter Head:
• 150 HP DC Motor, 1750/2000 RPM, 500 V
• Reducer w/60.7:1 ratio
• Pinion Stand
• Arbors: 10″ Diameter
Hydraulic Lift Table for Threading
Recoiler:
• Face Drum: 20″ Dia. x 65″
• Hydraulic Grip & Expand
• Integral Reducer w/24:1 ratio
• 2 Speed Drive-All Transmission w/1:1 and 3:1 ratios
Exit Coil Car:
• L-Type
• Strapping Slots in Base
• Self-Contained Hydraulic Power Unit
• Hydraulic Lift and Travel
2-Arm Turnstile:
• Power Rotation
(2) Heavy Duty Scrap Winders:
• Opposed Cones
• Level Wind
• Auto Dump
• Hydraulic Motor Drive

Full Auto Strapping Unit w/Automated Strapping Table:

• PAXSON 4-Arm Turnstyle w/Hydraulic Push-Off
– Straps Coil from I.D. to O.D.
• PAXSON Single Coil Lifting Table (lifts coil and transfers it to storage table)
• PAXSON Coil Storage Table
– 35′ Long x 6′ Wide
Slitter Tooling:
• Large amount of Knives, Spacers and Rubbers

This equipment is located in US