Agie Agiecut Classic 2S Wire cutting edm machine

Listing description

The AGIE AGIECUT CLASSIC 2S wire EDM machine was built in 2004 by the AGIE brand in Switzerland. The use of the EDM machine is to process a metal detail by means of electrical erosion and thus obtain complex / difficult-to-obtain shapes. AGIE AGIECUT CLASSIC 2S enables the processing of a workpiece weighing 200 kg when immersed and 450 kg when rinsing, and with dimensions (L x W x H) of 750 x 550 x 250 mm. The bead core has a cone with a maximum thickness of 100 mm and a maximum angle of +/- 30 degrees. The wire of the EDM machine with an electrical voltage of 0 to 25 N has a diameter of 0.2 - 0.33 mm. The travel in the U / V axis is 70 mm, and in the X / Y / Z axis it is 350, 250 and 256 mm.

Characteristic data of the AGIE AGIECUT CLASSIC 2S wire EDM machine

- maximum size of a detail (L x W x H): 750 x 550 x 250 mm
- maximum workpiece weight (immersion / rinsing): 200/450 kg
- maximum feeds in the X / Y / Z axes: 350/250/256 mm
- auxiliary table travel (U axis x V axis): 70 x 70 mm
- wire tension: 0 - 25 N
- wire diameter: 0.2 - 0.33 mm
- maximum cone angle: +/- 30 degrees
- maximum thickness of the cone: 100 mm
- V conductor: 0 degrees - 2 degrees
- operating voltage: 3x 400 V / 50Hz
- rated current: 14 A
- total weight of the AGIECUT CLASSIC 2S machine: 2580 kg

This equipment is located in PL