Listings similar to "Colchester Combi K4" 60

It has been very well serviced and maintained Following spare parts coming with the machine Various boards, contactors and electrical cables -Cont…

(2) 12 Positions Upper Turrets w/ Y-Axis Both (1) Lower Turret with 12 Positions - Live Tools Twin Spindle Design Full C Axis on Both Spindles Li…

Single-spindle lathe 1) machine information Max machining diameter: 16 mm Max processing length: 200 mm Motor power: 3.7 kW Spindle speed: 1…

CNC Fusion 640M Maximum workable length 1050mm Maximum workable diameter 660 Bar passage 51 Main spindle diameter 210 Main spindle power and rev…

REMAC 480 CNC numerical control lathe about 70 tools included (see photos) Maximum length: 700mm Diam. Max turner: 350 mm Automatic turret with 1…

Hyundai-Kia Smart Turn SKT 250MS CNC Lathe Make Hyundai-Kia, made in South Korea Model Smart Turn SKT 250MS Year 2005 Control Fanuc 18 IT Sw…

---MACHINE SPECIFICATION--- CHUCK SIZE 6" SPINDLE TYPE TWIN X AXIS TRAVEL 24M/MIN Z AXIS TRAVEL 24M/MIN TOOLS 8 X 2 SPINDLE MOTOR 4500RPM SPIN…

Fanuc 21i-T Control Swing Over Bed 17.72″ Swing Over Carriage 13.78″ Maximum Turning Diameter 10.63″ Maximum Turning Length 19.63″ Spindle Nose …

Made in: 2008 Characteristic: Control system: Fanuc Alpha X Series Maximum length of the turning: 650 mm Max. turning diameter: 350 mm Turni…

MAZATROL 640 Max. workpiece swing (capacity) 920 diameter max. machinable (capacity) 920 Template.product data sheet capacity max workable length …

Maximum work length: 27” Maximum diameter held in vises: 8 ½” Maximum cutter diameter: 6.3” (160 mm) Spindle speed range: 200 – 1200 R.P.M. Fe…

Okuma OSP-U10L, 6" Chuck, 1.63" Bar, Parts Catcher, Tailstock, Chip Chuck Size 6" Max Diameter Bar Capacity 1.63" Spindle Motor 15 / 10 HP…

8" 3-Jaw Manual Chuck Hand Wheels Quick Change Tool Post Tailstock Coolant System 3.5" Floppy Disk Interface RS 232 Port Interface Specifica…

The machine is in good technical condition, after prior arrangement it is possible to test it. Spinning length 1050mm, spinning diameter 220mm, newl…

Make Daewoo, made in Korea Model Puma 240L Year 2003 Control Fanuc OI-TC Chuck 250.0 mm Max. Turning length 648.0 mm Max. Turning diamete…

The lathe is in good technical condition. Standard machining diameter: 276 mm Rod diameter: 51 mm Main spindle speed range 35 - 4,500 (5,000) rpm …

Machine Type: CNC Lathes Year: 2004 Manufacturer: Kia Model: Super Kia Turn 15LMS Control: Fanuc 0iTB Condition: Used Under Power: …

Okuma Multi-Axis CNC Turning Machine Model: MULTUS B300-W Year: 2005.09 - Machine Specifications Dimensions and Capacities Metric Metric …

CNC Lathes CNC Control Replaced in 2019 10" 6-Jaw Chuck Steady Rest Aloris Quick Change Tool Post Assorted Tool Holders Specificati…

Main Spindle Chuck 15″ Sub Spindle Chuck 10″ X1 Axis Travel: 24.8″ X2 Axis Travel: 9.06″ Y Axis Travel: 10.23″ Z1 Axis Travel: 62.4″ Z2 Axis Tr…

Make Nakamura Tome, made in Japan Model TMC 18 Control Fanuc 21TB Year 1998 Chuck size 215.0 mm Swing over bed 400.0 mm Max turning diame…

Make Mori Seiki, made in Japan Model SL-35MC Year 1993/4 Control Fanuc MF-T6 (16T) Max. Turning dia 400mm Max. Turning lengt 780mm Swing …

Rarely available and offered with an impressive accessory list. This well maintained and very well spec’d 2010 built CMZ TL 15-TM, is supplied to the…

Used XYZ VL 555 x 2M, just arrived, The machine comes with a quick change tool post and 3 jaw chuck and is ready for powered demonstration in our Bri…

GMX_200_LINEAR Multifunction spindle lathe 5000 rpm 5-axis milling head 12000 rpm store 90 tool hsk 63 watering center 40 bars filter paper.

2005 Murata MW120 Twin Spindle CNC Turning Center 6" Chucks Twin Spindle X=24M/Min. Z=24M/Min. Tools 8 x 2 4500 RPM JIS A2-5 Spindle Nose C…

Controller: FANUC 210i-T Year of manufacture: 1999 Diameter allowed above the bed: 400 mm Diameter admitted in gap: 585 mm Diameter allowed on th…

Control Fanuc 18itb Chuck Size 210.0 Mm Swing Over Bed 510.0 Mm Max Turning Diameter 260.0 Mm Max Turning Length 490.0 Mm Bar Capacity 65.0 Mm …

Make Colchester Model Tornado 300 Control Fanuc OT-D Year 1995 Chuck 300.0 mm power chuck Swing 530.0 mm Between centres 660.0 mm Speed…

Control: Fanuc 21-T Max cutting: Diameter 209mm, length 355mm Bar capacity: 42mm vis a 16C collet style spindle Spindle speed: 5000 rpm Tool size…