Listings similar to "DEMAG 100T NC5 SYSTEC 100/420-200 Injection moulding machine" 60

Clamping force: 150 tons Opening stroke: 500 mm Mould height: 250 mm Clamping platen daylight: 750 mm Distance between tie bars: 470 x 4…

Make : SM 250 TS Clamping Unit : 250 Ton Control : Keba Screw Dia : 52 mm Year : 2007 Shot Size (Theoretical) cm³ - 425 (PP) Inject…

Make : FT 580 Clamping Unit : 580 Ton Control : Techmation Screw Dia : 90 mm Year : 2008 Screw L/D Ratio L/D - 20:6 Shot Size (Theo…

SANDRETTO 9 series 2650/4850 Clamping force: 485 T - 4850 KN Distance between columns: 740 x 740 mm Platform dimensions: 1120 x 1120 mm Min / max…

Make : FT 580 Clamping Unit : 580 Ton Control : Techmation Screw Dia : 90 mm Year : 2008 Screw L/D Ratio L/D - 20:6 Shot Size (Theoretical) cm³…

Make : SM 250 TS Clamping Unit : 250 Ton Control : Keba Screw Dia : 52 mm Year : 2007 Shot Size (Theoretical) cm³ - 425 (PP) Injection Weight g…

SANDRETTO serie 9 1300/3200 Clamping force : 320 T - 3200 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thic…

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Ca…

Machine: BILLION HERCULE 320 T -2000 from 2006 Year: 2006 Control type: DIXIT II Number of hours: 36 800 H Closing Closing force: 320 T Openi…

INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 318 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

SANDRETTO serie 9 1300/3000 Clamping force : 300 T - 3000 KN
 Distance between tie bar : 570 X 570 mm Platen dimension : 860 X 860 mm 
Mould thic…

INJECTION UNIT Screw diameter: 52 mm Calculated injection volume: 480 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 220 cm³/s Pressu…

Machine: BILLION HERCULE 320 T -2000 Year: 2008 Control type: DIXIT II Number of hours: 21,000 H Closing Closing force: 320 T Opening stroke:…

Year: 2008 Type of control: DIXIT II Number of hours: 21800 Place of storage: FRANCE Timeframe: AVAILABLE Closing Closing force: 320 T Opening…

Centering ring diameter on the plate is 160 mm (not the standard 125 mm) This machine was regularly maintained and has CE norms. Type of used …

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 154 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

Made in: 2008 Characteristic: Distance Between Tie Bars: 320x320 mm Clamping force: 500 kN Weight of the injection molding machine: 2300 kg

Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Clamp Force (t): 150 Screw Diameter (mm): 45 Max Shot Weight (…

Toshiba IS 450 GSW injection molding machine Year of production - 2007 Parameters: Closing force: 4,410 kN Screw diameter: 70 mm Injection volum…

Machine: DEMAG 650T System 650/1000 YEAR 2008 Year: 2008 Control type: NC4 Number of hours: 38,000 H Closing Closing force: 650T Opening stro…

Machine: DEMAG EL EXIS S 300 / 720 -1450 Year: 2006 Control type: NC4 Number of hours: 42,000 Closing Closing force: 300 T Opening stroke: 67…

Horizontal Demag Inyection Moulding Machine with 1300 tons of clamping force. Screw 110mm. Year 2007. Working Hours: 91.000. Machine under production…

Machine: DEMAG 420T System 420/810 -3300 Year: 2008 Control type: NC4 Number of hours: 40,000 H Closing Closing force: 420T Opening stroke: 7…

INJECTION UNIT Screw diameter: 60 mm Calculated injection volume: 763 cm³ Length / diameter ratio: L / D Pressure on the material: 1905 bars C…

Clamping force : 250T T Screw diameter : 60 mm Between tie bar : 560 X 560 mm Shot volume : 636 cm³ Injection pressure : 1351 Mould thickness mi…

Second screw: 30 mm Injection volume: 106 cm3 Injectable weight: 94 g Injection pressure: 1990 Between nozzle: 150 mm this extra information i…

Demag Extra 1500-600 injection molding machine Clamping force 150 tons Machine in very good condition.

Control type: NC4 Closing force: 300 T Opening stroke: 670 mm Between columns: 710 x 830 mm Mini / maxi mold: 330mm Max distance between plates:…

INJECTION UNIT Screw diameter: 50 mm Calculated injection volume: 530 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Year : 2007 Injection Unit : .../800-350 Screw diameter : 35 / 35 mm Injection volume : 139 / 139 ccm Shot capacity : 131 / 131 g Clamping U…