Listings similar to "Demag 330t 710 1450 System Injection moulding machine" 60

ENGEL 800 T injection press + ENGEL robot + Magnetic plates REF: 5550/800 Screw diameter: 105 mm L/D ratio: 20 Maximum material pressure: 1600 ba…

SANDRETTO 9 series 2650/4850 Clamping force: 485 T - 4850 KN Distance between columns: 740 x 740 mm Platform dimensions: 1120 x 1120 mm Min / max…

BMB 1000 T injection press Reference: 7500/1000 Closing force: 1000 T Screw diameter: 110 mm L/D ratio: 22 Maximum material pressure: 1600 bars …

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Ca…

INJECTION UNIT Screw diameter: 55 mm Calculated injection volume: 558 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 318 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

Clamping force: 200 tons Distance between tie bars: 560x560 mm Clamping plates dimensions: 830 x 830 mm Mold Height min. / max. : 177 x 310 …

Group E1300 / screw D63 / 863 cm3 / 1513 bar. Passage between columns 665 x 665 / trays 980. Stroke Mobile plate 660 / ejector 250. Maximum dimens…

Data sheet Brand: ARBURG Model: 630 S 2500-1300 Tonnage: 250 Year: 2000 Column passage: 630x630 Screw diameter: 55 Calculated injection volume…

Screw D65 / 863 cm3 / 1550 bars. Between columns 570 x 570 / trays 860 x 860. Mold thickness min 210 / max 730. Maximum ejector stroke 220. Total …

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 154 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

This Krauss Maffei 800-8000 MC Injection Moulding Machine was built in the year 1999 in Germany. It is equipped with a control unit of the same brand…

This Krauss Maffei 800-8000 MC Injection Moulding Machine from 1998 was manufactured in Germany and is operated through a Krauss Maffei MC3F Control …

Krauss Maffei KM 650 - 3500 C2 Injection molding machine Year of production - 1999 Location - Poland MC control type 4 Unit crimping Crimping …

Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Clamp Force (t): 150 Screw Diameter (mm): 45 Max Shot Weight (…

Machine: DEMAG EL EXIS S 300 / 720 -1450 Year: 2006 Control type: NC4 Number of hours: 42,000 Closing Closing force: 300 T Opening stroke: 67…

Machine: DEMAG 420T System 420/810 -3300 Year: 2008 Control type: NC4 Number of hours: 40,000 H Closing Closing force: 420T Opening stroke: 7…

Second screw: Screw diameter: 45 mm Injectable volume: 275 cm3 Injectable weight: 250 g Injection pressure: 1878 bar Nozzle center distance: 300…

Control type: NC4 Closing force: 300 T Opening stroke: 670 mm Between columns: 710 x 830 mm Mini / maxi mold: 330mm Max distance between plates:…

BILLION 430T INJECTION PRESS The machine is located in France. this extra information is standard for this model. Please always double-check the…

INJECTION UNIT Screw diameter: 60 mm Calculated injection volume: 763 cm³ Length / diameter ratio: L / D Pressure on the material: 1905 bars C…

Billion H6860/900T Injection Molding Machine The machine is located in France. Year 1996 Screw diameter 105 mm

INJECTION UNIT Screw diameter: 50 mm Calculated injection volume: 530 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Arburg Injection Moulding Machine. 130 tons of clamping force. Machine will delivery full checked tested and reconditioned in our workshop we can…

Clamping force : 250T T Screw diameter : 60 mm Between tie bar : 560 X 560 mm Shot volume : 636 cm³ Injection pressure : 1351 Mould thickness mi…

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 231 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

Brand : Billion Year : 1999 Type : HERCULE 3500/550 Clamping force : 550 T Screw diameter : 85 mm Between tie bar : 930 x 930 mm Sh…

INJECTION UNIT Screw diameter: 60 mm Calculated injection volume: 763 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

ARBURG 250T INJECTION PRESS The machine is located in France. this extra information is standard for this model. Please always double-check the …

Machine: DEMAG 200T BI MAT 610H / 120 BI MAT Year: 2000 Control type: NC4 Number of hours: 31 500H Closing Closing force: 200T Opening stroke…