Listings similar to "Demag Ergotech 50/200 Compact Injection moulding machine" 60

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Ca…

Screw D50 / 475 cm3 / 1977 bar. Between columns 510 x 510 / trays 770 x 770. Mold thickness min 210 / max 630. Stroke Mobile plate 550 / ejector 1…

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 154 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

Screw D65 / 863 cm3 / 1550 bars. Between columns 570 x 570 / trays 860 x 860. Mold thickness min 210 / max 730. Maximum ejector stroke 220. Total …

SANDRETTO serie 9 860/2200 Clamping force : 220 T - 2200 KN
 Distance between tie bar : 510 X 510 mm Platen dimension : 770 X 770 mm 
Mould thic…

Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Clamp Force (t): 150 Screw Diameter (mm): 45 Max Shot Weight (…

Machine: DEMAG EL EXIS S 300 / 720 -1450 Year: 2006 Control type: NC4 Number of hours: 42,000 Closing Closing force: 300 T Opening stroke: 67…

Machine: DEMAG 420T System 420/810 -3300 Year: 2008 Control type: NC4 Number of hours: 40,000 H Closing Closing force: 420T Opening stroke: 7…

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 182 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

INJECTION UNIT Screw diameter: 52 mm Calculated injection volume: 480 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 220 cm³/s Pressu…

SANDRETTO serie 8 612/95 Clamping force : 95 T Distance between tie bar : 370 x 370 mm Mould thickness min / max : 100 - 460 mm Opening strocke :…

Clamping force : 250T T Screw diameter : 60 mm Between tie bar : 560 X 560 mm Shot volume : 636 cm³ Injection pressure : 1351 Mould thickness mi…

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 231 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

INJECTION UNIT Screw diameter: 60 mm Calculated injection volume: 763 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

INJECTION UNIT Screw diameter: 50 mm Calculated injection volume: 530 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Control type: NC4 Closing force: 300 T Opening stroke: 670 mm Between columns: 710 x 830 mm Mini / maxi mold: 330mm Max distance between plates:…

Demag Extra 1500-600 injection molding machine Clamping force 150 tons Machine in very good condition.

Billion H6860/900T Injection Molding Machine The machine is located in France. Year 1996 Screw diameter 105 mm

INJECTION UNIT Screw diameter: 60 mm Calculated injection volume: 763 cm³ Length / diameter ratio: L / D Pressure on the material: 1905 bars C…

Used 370 Ton Demag Ergotech 330-1450 Injection Molding Machine Brand Demag Model Ergotech 330-1450 Year of Mfg 1995 Tonnage 370 Type Hydraulic…

INJECTION UNIT Screw diameter: 45 / 25 mm Calculated injection volume: 323 / 61 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s …

Machine: DEMAG 200T BI MAT 610H / 120 BI MAT Year: 2000 Control type: NC4 Number of hours: 31 500H Closing Closing force: 200T Opening stroke…

INJECTION MOULDING MACHINE DEMAG DC320 with the following characteristics: Press: 350 ton Platens : 700x700mm Capacity: 2.5kg/shot The machin…

INJECTION UNIT Screw diameter: 50 mm Calculated injection volume: 442 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Krauss Maffei KM 350-2700 C1 Year : 1996 Weight 19000 kg Clamping force : 3500 kN Voltage : 230 Minimum moulding size in mm : 380 mm Mould open…

CLAMPING FORCE: 50 Tons SHOT SIZE: 3.32 oz. SCREW DIAMETER: 30mm TIE BAR SPACING: 14.5" x 14.5" PLATEN SIZE: 21.2" x 20.8" CLAMP STROKE: 1…

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 231 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

INJECTION UNIT Screw diameter: 50 mm Calculated injection volume: 442 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Control type: NC 4 Control Locking system: Knee TECHNICAL DATA Closing force: 1250 kN Clearance between columns: 475 mm x 450 mm The dimensions …

INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 323 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…