Listings similar to "DEMAG ERGOTECH Extra 80-430 Injection moulding machine" 60

Tie Bar Distance :460×460mm Screw Diameter :40mm Theoretical injection capacity : 200㎝3 Injection mass :190g Maximum injection pressure: 190.8Mpa…

Tie Bar Distance :610×610mm Screw Diameter :55mm Theoretical injection capacity : 522㎝3 Injection mass :495g Maximum injection pressure: 177.2Mpa…

Model: IS450FA2 27A Screw Diameter (MM): 80 Tie Bar H X V (MM): 810 X 810 Clamp (ton): 450 Year: 2005 Size (L X W X H) (MM): 8400 X 1600 X 3250…

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Ca…

Data sheet Brand: ENGEL Model: VICTORY 500/120 Tech Tonnage: 120 Year: 2005 Column passage: 740 x 680 mold holder shelves Screw diameter: 40 C…

Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing …

SANDRETTO serie 9 1300/3000 Clamping force : 300 T - 3000 KN
 Distance between tie bar : 570 X 570 mm Platen dimension : 860 X 860 mm 
Mould thic…

INJECTION UNIT Screw diameter: 52 mm Calculated injection volume: 480 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 220 cm³/s Pressu…

Model: ve210-960, 15.3 oz (435 grams), man. YOM: 09/2005 dimi controls, 20.08" x 22.44" (570 mm x 790 mm) tie bar spacing, 31.89" x 34.25" (870 mm…

Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2006 Clamp Force (t): 90 Screw Diameter (mm): 35 Max Sh…

- Unilog B4 control - Year: 2004 - Injection unit: .../1900 - Screw diameter: 65 mm - Specific injection pressure: 1777 bar - Injection volume: …

Made in: 2006 Characteristic: Clamping force: 420 t Screw diameter: 60 mm Injection capacity: 891 cm³ Injection weight: 800 g Height of th…

GENERAL SPECIFICATIONS YEAR 2005 BRAND ENGEL TIEBARLESS TONNAGE 65 TON SHOT SIZE 3.2 oz. MODEL NUMBER VC200/65 TECH TYPE HORIZONTAL MACHINE NO…

Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw dia…

Centering ring diameter on the plate is 160 mm (not the standard 125 mm) This machine was regularly maintained and has CE norms. Type of used …

Model: HTF 360X Screw Diameter (MM): 65 Tie Bar H X V (MM): 710 x 710 Clamp (ton): 360 Year: 2004 Shot Weight (Gram): 972 Size (L X W X H) (MM…

Model: HTF250X Screw Diameter (MM): 50 Tie Bar H X V (MM): 570 x 570 Clamp (ton): 250 Year: 2006 Shot Weight (Gram): 442 Size (L X W X H) (MM)…

SANDRETTO serie 9 860/2200 Clamping force : 220 T - 2200 KN
 Distance between tie bar : 510 X 510 mm Platen dimension : 770 X 770 mm 
Mould thic…

MARIO FONIO 111-4/L/SX Spreading machine description bext

Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Clamp Force (t): 150 Screw Diameter (mm): 45 Max Shot Weight (…

Model: EL-EXIS S 100/420-310 Hybrid machine Clamping force: 100 tons DIstance between tie bars: 420x420 mm Screw dia: Weight: 6 tons

Machine: DEMAG EL EXIS S 300 / 720 -1450 Year: 2006 Control type: NC4 Number of hours: 42,000 Closing Closing force: 300 T Opening stroke: 67…

Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - Best …

Closing force: 1800 Kn Opening travel: 450 mm Mold min / max thickness: 200/550 mm Distance between the plates: 1000 mm Mold holder plate (LxH): …

Machine: DEMAG 420T System 420/810 -3300 Year: 2008 Control type: NC4 Number of hours: 40,000 H Closing Closing force: 420T Opening stroke: 7…

INJECTION UNIT Screw diameter: 52 mm Calculated injection volume: 480 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 220 cm³/s Pressu…

Engel Victory 750/150 Tech Injection weight: 354 g Closing force: 1,500 kN Screw diameter: 50 mm Injection pressure: 1427 (1909) bar Column spac…

Control type: NC4 Closing force: 300 T Opening stroke: 670 mm Between columns: 710 x 830 mm Mini / maxi mold: 330mm Max distance between plates:…

Year: 2003 Operating hours: 56,891 h Screw: HVF 22 mm Injection pressure: 1890 bar Stroke volume: 123 ccm Clamping force: 60 t tie bar sp…

Arburg Allrounder 420C 800 250 Injection molding machine Arburg Allrounder 420C 800 250 injection molding machine Year 2004