Listings similar to "Demag Extra 35-120" 60

State-of-the-Art Krauss Maffei KM100-180-180 CXV 2-Shot Injection Molding Machine with Robot Elevate your manufacturing capabilities with the Krau…

Clamping force: 150 tons Opening stroke: 500 mm Mould height: 250 mm Clamping platen daylight: 750 mm Distance between tie bars: 470 x 4…

Make : SM 250 TS Clamping Unit : 250 Ton Control : Keba Screw Dia : 52 mm Year : 2007 Shot Size (Theoretical) cm³ - 425 (PP) Inject…

Clamping force: 100 tons Opening stroke: 500 mm Mould height: 250 mm Clamping platen daylight: 750 mm Mould clamping plattens (b x h) : …

Make : FT 580 Clamping Unit : 580 Ton Control : Techmation Screw Dia : 90 mm Year : 2008 Screw L/D Ratio L/D - 20:6 Shot Size (Theo…

Tie Bar Distance :610×610mm Screw Diameter :55mm Theoretical injection capacity : 522㎝3 Injection mass :495g Maximum injection pressure: 177.2Mpa…

Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould …

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Ca…

Clamping force: 200 tons Distance between tie bars: 560x560 mm Clamping plates dimensions: 830 x 830 mm Mold Height min. / max. : 177 x 310 …

Clamping force: 35 tons Distance between tie bars: 270 x 270 mm Platten dimensions: 380 x 380 mm Screw diameter: 25 mm Injection volume: 49 cm3 …

Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw dia…

Krauss Maffei 2000-17200MX Clamping force: 2000 ton Distance Between tie bars: 1850x1600mm Clamping plates dimensions: 2650x2400mm mold installa…

Clamping force: 300 ton Opening path: 700 mm Mould installation height min: 400 mm Distance between tie bars: 720 x 720 mm Platten size: 1040 …

Made in: 2006 Characteristic: Clamping force: 420 t Screw diameter: 60 mm Injection capacity: 891 cm³ Injection weight: 800 g Height of th…

MM 1000-6610 Ferromatik Clamping force: 1000 tons Screw diameter: 90 mm Injection pressure: 2300 bar Injection volume 2799 cm3 Injection shot: 2…

Horizontal Injection Moulding Machine brand Demag. 350 tons of clamping force. Year 2003. 66.000 working hours. Screw diameter: 70mm. Extra: Robot We…

Clamping force: 600 ton Distance between tie bars: 1030x 910mm (HxV) Tool min./ max: 400/950mm Screw dia: 105 mm Injection volume: 3380 cm3 Robo…

Clamping force 280 ton Distance between tie bars 610x610 mm Platen Sze HxV 900x900 Srew dia 55 mm Injection Pressure 1979 kg/cm3 Injection Volum…

Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Clamp Force (t): 150 Screw Diameter (mm): 45 Max Shot Weight (…

Clamping force: 50 t Tool height: 210 mm Opening distance: 400 mm Platten dimensions: 520 x 520 mm Clearance between tie bars: 355 x 355 mm Scre…

Demag Model: Ergotech 200/560-840 concept Year : 2002 Clamping force: 200 ton Screw dia: 30mm Hours: 50.000 Core pullers: 1 hydraulic Pneumat…

Engel e-motion 310/100 electric machine screw: 30 mm FOR REPAIR Mat: polyamid, polypropylen 5,3x1,6x2,1 m, 10,8 ton

Machine: DEMAG EL EXIS S 300 / 720 -1450 Year: 2006 Control type: NC4 Number of hours: 42,000 Closing Closing force: 300 T Opening stroke: 67…

Model: EL-EXIS S 100/420-310 Hybrid machine Clamping force: 100 tons DIstance between tie bars: 420x420 mm Screw dia: Weight: 6 tons

Horizontal Demag Inyection Moulding Machine with 1300 tons of clamping force. Screw 110mm. Year 2007. Working Hours: 91.000. Machine under production…

Machine: DEMAG 420T System 420/810 -3300 Year: 2008 Control type: NC4 Number of hours: 40,000 H Closing Closing force: 420T Opening stroke: 7…

INJECTION UNIT Screw diameter: 50 mm Calculated injection volume: 530 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Used 370 Ton Demag Ergotech 330-1450 Injection Molding Machine Brand Demag Model Ergotech 330-1450 Year of Mfg 1995 Tonnage 370 Type Hydraulic…

Clamping force : 250T T Screw diameter : 60 mm Between tie bar : 560 X 560 mm Shot volume : 636 cm³ Injection pressure : 1351 Mould thickness mi…

INJECTION UNIT Screw diameter: 60 mm Calculated injection volume: 763 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…