Listings similar to "DOOSAN-PUMA PUMA-300LC" 60

Okuma LU300 2MC600 CNC Lathe (2010) Chuck Size: 10" Bar Capacity: 2.4" # Axis: (4 Turning) # Axis: (1 Milling – “C” Axis) Power: 30 hp Max RP…

Milling/Drilling Capabiity Subspindle Chip Conveyor LNS Express 220 Bar Loader Fine Filter Coolant Parts Exit Conveyor System Card Interface R…

Make Haas, made in USA Model ST 30 Year 2012 Control Haas CNC control Chuck size 254.0 mm Distance between centres 762.0 mm Max. Cutting …

---MACHINE SPECIFICATION--- X-AXIS STROKE: 200MM Z-AXIS STROKE: 380MM SPINDLE SPEED MAX: 4500 RPM RAPID X-AXIS: 18M/MIN RAPID Z-AXIS: 24M/MIN S…

Binns & Berry CNC Lathe x 4000mm 800mm dia swing 4000mm between centres 2 x fixed steadies 2 x travelling steadies 760m width bed 4 jaw chuck 6…

EQUIPPED WITH: Ganesh CNC Control Chip Conveyor (Built-In) - Parts Conveyor Coolant System CATALOG SPECIFICATIONS: Bar Capacity, Round 1.25" …

Swing Over Front Apron 23″ Swing Over Cross Slide 9.…

CNC lathe Manufacturer: Mazak Model: QT Nexus 200-II M Year: 2008 CNC: Mazak Mazatrol Matrix Nexus

We bought used machine in 2018, we did small repairs. It was regularly maintained . Machine is in perfect working condition.

Doosan Puma 2000Y cnc lathe Specs: Year 2010 Control Fanuc 31i-A Number of Axes 4 Chuck Size Swing 23.6" Turning Diameter 13" Centers Distance 20.1"…

Feeder lathe Traub Tnl 32G + FMB turbo 5-42 The machine is from 1996. The machine tool has two eight-tool turrets, including one fixed and one to…

Location: Czech Republic Description: The machine is in good technical condition. Technical parameters: Revolving diameter: Across the front cove…

CONTROL FANUC oi-Td with manual guide SWING 470 mm MAXIMUM CUTTING DIAMETER 340 mm BAR CAPACITY 66 mm SPINDLE MOTOR POWER 11/18,5KW SPINDLE…

2011 Takamaz Model XD-8 CNC Lathe X-Axis Stroke: 200mm Z-Axis Stroke: 380mm Spindle Speed Max: 4500 RPM Rapid X-Axis: 18m/min Rapid Z-Axis: 24…

The machine is in good technical condition, after prior agreement it is possible to test it. spindle drilling through draw tube 73 mm, feed 250 mm, w…

Okuma CNC in good condition model LB 25

Manufacturer: Gildemeister Model GDM 90 MC CNC Control: Eltropilot Y.O.M.: 1992 Operating hours: 17.235 Condition Optically-mechanically excelle…

Made in: 2007 Characteristic: Control system: FAGOR Maximum-turning length: 1000 mm Turning diameter over bed (max): 550 mm Turning diameter…

Doosan Puma 280M CNC Lathe C axis Machine is in good working condition

Type designation: Gildemeister CTX 400 S2 Year of manufacture: 1999 Operating hours: 65.655,88 h Control: Heidenhain CNC Pilot 3190/4290 Special …

MACHINE DATA Machine type - VDF BOEHRINGER DUS 560 Manufacturer - VDF BOEHRINGER Model - DUS 560 Year of manufacture - 1994 Condition - ready …

---MACHINE SPECIFICATION--- X-AXIS STROKE: 200MM Z-AXIS STROKE: 380MM SPINDLE SPEED MAX: 4500RPM RAPID X-AXIS: 18M/MIN RAPID Z AXIS: 24M/MIN FE…

HAAS “BIG-BORE” CNC TURNING CENTER New November 2001, Model SL30TB EQUIPPED WITH: Haas CNC Control 4″ Big Bore Drive System Collet Chuck – 12-Po…

Controller : FANUC 18-T Number of axis total 2 Number of spindles 1 Number of revolvers 1 Distance between centres 375 mm Swing diameter ov…

It has been very well serviced and maintained Following spare parts coming with the machine Various boards, contactors and electrical cables -Cont…

Eurotech Model E-42S Slant Bed CNC Lathe With Sub Spindle   Max Turning Diameter: 8.7" Max Machining Length: 14.96" Max Swing: 15.74" …

Single-spindle lathe 1) machine information Max machining diameter: 16 mm Max processing length: 200 mm Motor power: 3.7 kW Spindle speed: 1…

CNC LATHE Control system: Siemens Sinumerik 840C / C200-4 Bar passage: 60 mm Spindle speed: 5000 rpm Main spindle motor power: 29/20 kW TURRET 1…

Fanuc 10T Control Swing Over Bed 20.5″ Maximum Turning Diameter 13.4″ Maximum Turning Length 20.9″ Swing Over Cross Slide 13.8″ Distance Between…

EQUIPPED WITH: Harrison GE/Fanuc "Alpha" CNC Controls Removeable Gap 12" 4-Jaw Chuck w/Jaws - 10" 3-Jaw Chuck w/Jaws D1-6 Camlock Spindle Nose …