GLEASON NO. 106 GEAR GENERATOR *FROM AIRCRAFT*

Listing description

EQUIPPED WITH:

Stock Divider
Helical Motion
Cutter Clamping Bolt
Hydraulic Clamping
Coolant Tank and Pump
Guarding
Change Gears

SPECIFICATIONS:

Capacity:
Diametral Pitch (coarsest): 4
Cone Distance Max. (30 Degree spiral angle and 7-1/2" Cutte): 5 1/4"
Work Head Angle: -12 Degree to 90 degree
Extreme Ratio: 15 to 1
Min. Ratio For Pinions To Operate With Helical Form Gears: 2 to 1
Max. Gear Pitch Diameter (30deg. Spiral Angle):
10 to 1 Ratio: 8-1/2"
2 to 1 Ratio: 7-1/2"
1 to 1 Ratio: 6"
Face Width (maximum): 1-1/4"
Number of Teeth: 5 to 97
Work Spindle Diameter Of Taper Hole At Large End: 3-29/32"
Taper Per Foot: 39/64"
Depth Of Taper: 6"
Diameter Of Hole Through Spindle: 2-7/16"

Cutter Speeds (feet per minute): 74 to 380
Feed (sec./tooth): 3 to 68.6
Electrical Equipment:
Main Motor: 5 HP, 1800 RPM
Hydraulic Motor: 3/4 HP, 1800 RPM
Coolant Motor: 1/2 HP, 3600 RPM
Floor Space: 61-1/4" x 84-1/4"
Net Weight: 14,300 lbs.
Shipping Weight, Boxed For Export: 16,000 lbs.

This equipment is located in US