Hardinge SR 150MSY

Listing description

specifications:
maximum swing over way covers 22.44″ (519.2mm)
maximum bar capa 2″ (51mm)
maximum machining diameter 12.15″ (308.6mm)
maximum machining length w/tailstock and 6” chuck 20.5″ (520.7mm)

spindle:
maximum speed 6000-rpm
maximum power rating (dual wound motor) 20-hp (15 kw)
torque at base speed (500 rpm) 211 ft-lb (287 nm)
torque at base speed (750 rpm) 141 ft-lb (191.2 nm)
spindle nose a2-6
spindle bore (not bar capa) 2.64″ (67.05mm)
spindle center height 41″ (1041.4mm)
spindle reach 18.7″ (457.2mm)
spindle orient (optional) 1.0 degree

travels and feedrates:
maximum x-axis travel 7.45″ (189.2mm)
maximum z-axis travel 21.94″ (557.3mm)
maximum y-axis travel (+2.0″ -1.377″) (optional) 3.377″ (85.77mm)
maximum z-axis thrust 2,250 lbs. (10,000n)
maximum y-axis thrust 1,175 lbs. (5,227n)
x-axis rapid traverse rates 1100-ipm (28m/min)
z-axis rapid traverse rates 1500-ipm (38m/min)
y-axis rapid traverse rates 375-ipm (9.52m/min)

sub spindle (optional):
maximum speed 6000-rpm
torque at base speed 35 ft-lb (47.7 nm)
base speed 1,500-rpm
maximum power rating 10-hp (7.5 kw)
spindle nose a2-5/16c
chuck size (chuck not included) 6″ (150 mm)
maximum 16c collet capa 1.625″ (42mm)
spindle center height 41″ (1041.4mm)
spindle reach 18.7″ (474.9mm)
spindle orient (optional) 1.0 degree
maximum travel 18.7″ (474.9mm)
maximum traverse rate 1500 ipm (38 m/min)

coolant facilities:
coolant capa 50 gallon (189 liter)
maximum pressure 187 psi (12.9 bar)
coolant flow rate (per-minute) 6.75 gallon (25.48 liters)

power requirements (standard configuration)
maximum kva rating 58 kva
volts/full load amps 230 volt/112 fla
phase/hertz 3-phase/50-60 hz

miscellaneous:
program resolution .0001″ (.001mm)
machine lubrication grease
machine communication rs-232-c, ethernet
machine length (sub-spindle version) 117.8″ (2992.12mm)
machine length (w/chip conveyor) 163.2″ (4145.3mm)
machine depth 89.3″ (2268.2mm)
machine height 77.7″ (1973.6mm)
approx. machine weight 15,086 lb (6443 kg)
approx. shipping weight 15,686 lb (7115 kg)
air requirement 70 – 90 psi (4.8 – 6.2 bar)

equipped with:
– ge fanuc “i” sr series cnc control
– tool touch probe
– parts catcher
– collet chuck on main spindle
– 16c collet subspindle
– c-axis on main and subspindles
– y-axis capability
– 12 position esa (eppinger self alignment) turret
– chip conveyor
– lns servo 65 short magazine bar feed
– all available standard and live tool holders
– all available manuals

This equipment is located in US