Listings similar to "Hwacheon Sirius 2" 60

FELLER QM-22 VERTICAL MACHINING CENTER / FANUC CONTROLLER A VERY FAST AND COMPACT MACHINE FOR GENERAL MACHINING • Ideal for creating, machining…

X - 1660 mm y - 510 mm Z - 510 mm Table clamping surface 2000 x 510 mm SK 40 spindle support Spindle speeds from 40 to 12,000 rpm 15 kW spindle…

Description CNC Machining Center Mas MCV 750 Sprint The machine is in good technical condition, after prior agreement the possibility of testing. …

Makino High Speed Vertical Machining Center. Model SNC-64G with 20,000 RPM Spindle Specs: Table Size: 29.53" x 15.75" Machine Travels (X/Y/Z): 2…

Used Daewoo Mynx 550 Machining center - vertical Technical details in the pictures. Accessories and tools included. Machine visible under powe…

CME FS-0 Machining Center with 3-axis CNC, with high-speed electrospindle 28KW XYZ: 1200 x 750 x 750mm HSK 63 High Speed 3820rpm – 28Kw – 313V…

x­travel 630 mm Technik y­travel 560 mm z­travel 560 mm c­axis Tisch 360° ° b­axis Spindel=rechts:90/links=10° ° control Heidenhain TNC 430 Mil…

Machining Center - Vertical make: MATEC model: 30L year of manufacture: 1999 type of control: CNC country of origin: Germany x-travel: 2000 mm …

The GUALDONI GV 400 vertical upright mobile machining center used is a medium / large size vertical control center with cnc SELCA 4040D, racing 2000…

Made in: 2002 Characteristic: Control system: Acramatic Length of the working table: 2300 mm Width of the working table: 900 mm Number of to…

Table size 1626 x 711mm Traverses xyz 1626 x 813 x 762mm Max height under spindle 864mm Spindle motor power 20hp Spindle speed 7500rpm Descripti…

Equipment: - AC motors for x/y and z-axis - tool clamping hydraulic/mechanical - chip conveyor with separator (screw conveyor) - dividing head N…

2018 HWACHEON VESTA 1000+ CNC 3-Axis Vertical Machining Center. Equipped with a 12,000 RPM spindle and a 30-position tool changer, this used equipmen…

HURCO - VMX50/40T Year: 2004 - X/Y/Z=1270/660/610 mm - system: ULTIMAX 4 - from toolroom workshop - regularly maintained - 57800 ho…

Vertical machining center FAMUP model MMV 200 EVOLUTION - CNC SELCA 3045 Longitudinal travel 2000 mm Cross travel 600 mm Vertical travel 600 mm …

The Deckel Maho DMU 60T milling center was built in 2001. This milling machine is equipped with a Heidenhain TNC 426 cnc control, which ensures synch…

x-travel 640 mm y-travel 600 mm z-travel 500 mm CNC-control iTNC 530 HEIDENHAIN table-size 850 x 630 mm …

TABLE SIZE: 26" x 14" TABLE LOAD CAPACITY: 3000 pounds X-AXIS TRAVEL: 20" Y-AXIS TRAVEL: 16" Z-AXIS TRAVEL: 20" TABLE TOP TO SPINDLE NOSE: …

Catalog No. : 6561 Type: VMC 40/8 Producer: Strojtos Made in: 2005 Characteristic: Control system: Heidenhain 530 Maximum table load (evenly …

Control: Haas 32 BIT/CRT Condition: Used Under Power: Yes Table: Table Size: 48" x 18" Maximum Table Load: 3,500 lbs Travels: X-Axis Tra…

EQUIPPED WITH: Haas CNC Control 10-Position Automatic Tool Changer Single Or Three Phase Operation Some Tooling - Coolant System 1.5 HP Airflo…

Prepped for Coolant Thru Spindle (no pump or filter) Chip Conveyor Rigid Tapping Remote Jog Handle 20 Position Side Mounted ATC RS-232 Port Inte…

CNC Vertical Machining Centers 2 Pallet Changer System w/ (2) Drilled/Tapped Pallets Full 4th Axis Rotary Table - 360,000 Degree Trunnion A Axis…

Table dimensions: 1200x400mm X, Y, Z travels: 600x400x510mm Rapid feed on XY axes: 36,000mm / min. Rapid feed on Z axis: 30,000mm / min. …

The vertical milling center DECKEL MAHO DMU 60 T was produced in 2001. The machine is equipped with three synchronous axes. Has twenty tools in stock…

CNC OSP P 200 M Course X 762 mm Course Y 460mm Course Z 460mm RPM 15000 Engine Power 22 kw Cone Type SK40

Year 2001 Dimensions Table Mm 700 X 400 Admitted Weight On Table 200 Kg Axis travel X Mm 550 Axis Y travel Mm 400 + 20 Axis travel Z Mm 350 Rap…

machine fully functional and connected in operation, year 2006 Technical parameters: - clamping surface of the table: 1080 x 580 mm - spindle ta…

The DUGARD EAGLE 660 milling center was produced in 2005. The vertical machining center has a reconditioned spindle with a tool haul change - a rod, …

Made in: 2005 Characteristic: Control system: Fanuc Series 0i- MB Length of the working table: 1200 mm Width of the working table: 510 mm X-…