Illig RV 53 thermoforming machine
Model: RV 53
Molding area (VxH): 500 × 350
Molding depth: 100 mm
Material thickness (min): 0.10 mm
Material thickness (max.): 1.40 mm
Feed systems: roll fed
Lower mobile table
Machine in production
The stacker is incomplete, the top and bottom table components are missing.
Cutting station fully operational, regeneration was 2 years ago, heating of the cutting station fully operational, upper and lower table in good condition, heating 100% efficient.
Capacity approx. 25 cycles per minute.
Cutting station regeneration, pump regeneration, chain regeneration,
The drive for transporting the film has been replaced with a servo motor with an inverter
This equipment is located in PL