INGERSOLL MASTER CENTER CNC HORIZONTAL BORING MILL

Listing description

Work Completed During Retrofit/ Rebuild:
Fanuc 31i Retrofit 2013, New Ballscrews, New Motors, New Drives, New Wiring, Ram Rebuilt, Heads Rebuilt, Waycovers Rebuilt, Bedways Ground, All New Piping for Lube and Pneumatic, New Chip Conveyors, C-Axis Bearing, C-Axis Clamping, Chiller Unit.

This Very Large Rebuilt Ingersoll Master Center is a Horizontal Boring Mill with a Massive 24"sq Ram Instead of a Quill. It has a 206" x 120" CNC 360° Rotary Table with 215" of Cross Travel. The Massive Column has 150" of Vert Travel and 150" of W-Axis Column Travel.
The Machine has no Tool changer but has a Qty (7) Head Automatic Head Changer with These Heads: (2) Nutating Heads, (1) 6:1 Straight, (1) 6:1 Angle,
(1) 1:1 Straight, (1) 1:1 Angle, (1) 12:1 Angle (Right) for Large Slotters and Face Milling.
A Master Drive System with Integrated
C-Axis is Powering the Spindle Units.
The Head Changer Arrangement Allows this Horizontal Boring Mill to be Used for a Flexible Application Range. This Flexibility Includes Capacity for 5-sided Machining, Vertical Turning and Machining on Inclined and Angular Surfaces.
Equipped with a Modern Hydrostatic Guide Way System for X,Y,Z,W and E-Axis Which Has Virtually No Friction, Practically No Wear, and Extremely Good Dampening Characteristics.
Further Equipped with Modern AC-axis Drives, and a Backlash Free Drive Systems, and Digital Feedback.

EQUIPPED WITH:
Fanuc 31i CNC Control, 206" x 120" CNC Rotary Table with Heidenhein Rotary Scale Feedback and qty (4) Shot Pin Table Locking System, (7) Head Automatic Head Changer, Ram Type Spindle, Flood Coolant and Through the Tool Coolant, and Upgraded Chip Conveyors.

Note: Currently No Pit Except for the Chip Conveyor

CNC Control: yes
Type of CNC Control: Fanuc 31I-B5 CNC Control
Table Size: 5,250 mm x 3,000 mm
Table Load Capacity: 50 Ton
X-Axis (Table Linear Travel, Across): 5,500 mm (216.54")
Y-Axis (Headstock Vertical Travel ): 3,800 mm (149.60")
Z-Axis (RAM Horizontal Travel, In/Out): 1,100 mm (43.30")
C-Axis (Rotary Axis around Horizontal Spindle): Continuous & Reversible
E-Axis (Table Rotation): 360°
W-Axis (Column Horizontal Travel, In/Out): 3,800 mm (149.60")
B-Axis (Nutating Axis) ± 95°
Spindle Horsepower: 125 HP continuous
Ram Area (L-R x F-B): 600 mm x 600 mm / 23.6" x 23.6"
Axis Speeds / Feed Rates (X, Y, & W Axis): 15,000 mm/min 600 IPM
Axis Speeds / Feed Rates (Z-Axis): 5,000 mm/min 196.8 IPM
Axis Speeds / Feed Rates (C-Axis): 8 RPM
Axis Speeds / Feed Rates (E-Axis): 1.25 RPM
CONDITION: Machine Appears to be in Excellent Condition!

This equipment is located in US