Search results for "Bender" 50

Very good condition Didde Model ML 2000 from in house print shop Age: 2001 Didde ML 2000 Roll stand - 40” diameter w/3” air unwind shaft. …

Touch Screen Control Premill; Glue Pot; AirTec; Double-Motor End Trim; Top & Bottom Trim; Single Motor Corner Rounding; Profile Scraping; Fin…

Davi Promau - MCO 1524 Make: Davi Promau Type: MCO 1524 Control: DAVI EASY Year: 2013 DAVI PROMAU Easy opperator TOUCH Harned rolls (induction …

Age: 2004 Max.Size: 74 x 52 cm (29 x 20 inch) Colors: 2 Counter: 81 mio Heidelberg SM 74-2-P-H Year of man : 2004 2 Colors , 1 1 Perfec…

Extended rolls end for profile bending jobs Variomatic speed range  CE-Safety guides Fully hydraulic machine Hydraulic drop end Rolling…

Made in: 2005 Characteristic: Control system: MICRO computer Maximum power: 300 kN

Rolling width 1550 mm Rolling thickness 3x toproll Ø 10 mm Rolling thickness 5x toproll Ø 12 mm Rolling thickness prebending 8 mm Top Roll Ø …

conical bending attachment extended rolls for profile section bending central lubfrication digital read out positioning side rolls hardned and gr…

Type of machine: three-roll sheet metal bending machine Make: ORMIS Type: CLI HY 3R 20 / 16x3100 Year of construction: 2008 Control type: convent…

Used .75" Brabender extruder, model 2503, 25:1 l/d, electrically heated, 3 barrel zones, 1 die zone, 3 hp motor, with control panel, 230 volt.

KBA RA 106 SIS SPC-8SW4 FAPC Year: 2012 249 mill imp Max sheet size: 740 x 1.060 mm Min sheet size: 340 x 480 mm Min sheet size Perfecting: 400 …

Rolling width: 6000mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:12mm Rolling thickness prebending: 8mm …

Automatic 3D wire bender, built in Poland in 2022, is designed for automatic bending of wire with a maximum diameter of 8 mm. The wire bender is char…

incl. 8 changeable spare rolls up to diameter..... mm High production cylinders and tubes Very shortrolling times Very short straight ends and rou…

DESCRIPTION: This heat wrapping machine has been designed for the pharmaceutical and cosmetic market. It is suitable for treating many types of prod…

Tube bending machine WORTELBOER HOLLAND - PBM-16 Make: WORTELBOER HOLLAND Type: PBM-16 Year: 2006

1) year of manufacture : 2000 (100 plates/hr) or 2) year of manufacture : 2002 (70 plates/hr) Both imagesetters serviced by Kodak Polska (Kodak eng…

Age: 2011 Max.Size: 75 x 53 cm (29 x 20 inch) Colors: 4 Counter: 115 mio Availability: Immediately Important:Machine is Complete and in Excellen…

DESCRIPTION: Case packer suitable to complete the following production cycle: receive the product from an upstream machine and transport it via inpu…

Made in: 2003 Characteristic: Total hours: 66.600 h Pressing force: 220 t Maximum bending lenght: 2250 mm Max. bending height: 203 mm Maxi…

Hardned and grounded rolls Conical bending attachment Digital read out positioning side rolls CE-Mark  Fully hydraulic opperated Central lu…

Maximum Tube Bending Capacity: 4" OD x 0.109" WT (mild steel) Maximum Centerline Radius: 12" Maximum Degree of Bend: 180° + springback Maximum Tub…

Max. Pipe O.D. (S = 56,893.4 PSI): 2" x 0.12" Max. Pipe O.D. (For Repeat Feeding): 2" Round Tube - Non-Ferrous (S = 35,558.4 PSI): 2" x 0.2" Round…

<u>20,000 lbs DALLAS DJR-20,000#x72 Coil Reel, s/n 20212</u> 72" Wide, 20"-24" I.D. / 72" Max O.D. Powered Jog Forward and Reverse 6 Keepers …

AB BACKTEMANS 3 rolls plate rolling machine Machine is in good working condition Maximum thickness : 30 mm

Description: Heidelberg SM 74-5-P2 L, 1995, five color press with coater Perfector 2/3 153 mill.imp. CPC 1-04 Plate punch Plate bender Feed…

The machine is in good technical condition, it is possible to test it by agreement. The dimensions are: h - 1.20 m w - 1.90 m l - 5.60 m The tools fo…

<u>Bending Capacities</u> Round Tube, Mild Steel: 2.00" x0.08" Round Tube, Non-Ferrous 2.00" x0.14" Round Tube, Stainless: 2.00" x0.05" Square T…

Used Brabender gravimetric feeders consisting of: (2), Model Numbers DDW-132-FW79-150. New 12/2003. Equipped with single screw discharge mounted w…

Prebending: 22mm Bending capacity ø1,5m full width: 27mm Bendingcapacity ø3,5m full width: 33mm Bendingcapacity ø>3,5m width:1250mm: 43,5mm W…