SONY SVP-5600 Sony V

Manufacturer Sony
Model SVP-5600 Sony V
Year -
Country UAE UAE
Condition Good
Main category Broadcast, Film and Audio
Subcategory Editing Equipment
ID P80909028

Model Details

S-VHS Editing Player.Built-in TBC, TC reader (LTC/VITC) and RS-422A interface.

Features:

Built-in Time Base Corrector
Chroma Process Improvement
Four Channel Audio Playback System
Frame Accurate Editing
Built-in SMPTE Time Code Reader
S-video Signal Output (4-pin DIN)
Component signal output (option)
A TBC is essential in such system applications as A/B roll editing to eliminate VTR jitter and for the proper adjustment of phase difference. Featuring 4fsc sampling and 8-bit quantization, this TBC offers superior picture quality without any additional time base correction.
This makes a chroma edge sharper and greatly improves the chroma band width, thus enabling sharper and clearer color picture reproduction.
Two channels use Hi-Fi tracks and two use normal longitudinal tracks. The Hi-Fi mode provides a superb 90dB dynamic range and a wide frequency response for high quality sound reproduction. XLR type connectors are used for all four channels, allowing direct connection to professional audio products.
In both assemble and insert editing modes precise, frame accurate video editing is possible. This is achieved by a sophisticated servo system, an improved quick response mechanism and built-in LTC/VITC time code capability.
Time code is indispensable for precise, frame accurate editing. The reading of SMPTE standard LTC and VITC is built into the SVP-5600.
S-Video Out connectors carries separate Y and C signals. This reduces picture deterioration due to cross color and dot interference during signal transmission.
Power requirements: AC120V, 60Hz, 3 wire grounded receptacle
Power consumption: 53W
Operating temperature: 5 to 40C(41 to 104F)
Tape speed: 33.35mm/s
Video signal: NTSC (color) EIA(monochrome)
S/N ratio: More than 47dB(in S-VHS/VHS mode)
Horizontal resolution: S-VHS: More than 400TV linesVHS: More than 240TV lines
Frequency response: Normal:50Hz to 12kHzHi-Fi: 20Hz to 20kHz
Tape format: S-VHS or VHS
Input: REF VIDEO IN (BNCX2,loop-through): Black burst or 1.0Vp-p,75,unbalanced,sync negative
Outputs: COMPOSITE OUT(BNC): 1.Ovp-p, 75, unbalanced, sync negativeS-VIDEO OUT(Mini DIN 4-pinx2):Y;1.0Vp-p,75,unbalanced,sync negativeC;0.286Vp-p(burst),75, unbalancedCOMPONENT OUT(BNCX3,with optional SVBK-170):Y;1.0Vp-p, 75 unbalanced, sync negativeR-Y;0.7Vp-p,75 unbalancedB-Y;0.7Vp-p,75,unbalancedVIDEO MONITOR OUT(Super) (BNC):1.0Vp-p, 75, unbalanced, sync negative
Dynamic range: More than 90dB(in Hi-Fi mode)
TBC REMOTE: 15-pin multi
REMOTE: 9-pin multi, SMPTE RS-422A standards
WIRED SIRCS: Control-S(Power supplied type)
FFWD and REW time: Approx. 2.5min.(with T-120)
Search speed(with optional SVRM-100): SHUTTLE:STILL,1/30, 1/10, 1/5, 1/2, 1, 2, 10 times normal speed , forward and reverse JOG: Frame by frame, forward and reverse.
Outputs(0dBu=0.775Vrms): Normal CH-1/2(XLR):+4/0/6dBm selectable at 600 load, low impedance, balanced HI-FI CH-1/2(XLR): + 40/-6dBm selectable at 600 load,low impedance ,balancedAUDIO MONITOR OUT(PIN):-5dBu,at 47k load, unbalancedHEADPHONE OUT (STEREO PHONE): -50 t0 -18dBu at 8 load unbalanced
S/N ratio (Normal audio at 3% distortion, Dolby OFF):: More than 43dB
TIME CODE OUT(BNC): 0dBu3dB at 10k load, unbalanced(0sBu=1.55Vp-p Pulse)

Technical Details

Features:

Built-in Time Base Corrector
Chroma Process Improvement
Four Channel Audio Playback System
Frame Accurate Editing
Built-in SMPTE Time Code Reader
S-video Signal Output (4-pin DIN)
Component signal output (option)

We add hundreds of new listings every week. Be sure not to miss any SONY SVP-5600 Sony V by subscribing to our email updates.

We also send announcements for upcoming auctions for Broadcast, Film and Audio.

We hate spam as much as you do