Toshiba Bth 110 R18 "Hi Cube" Cnc Table Type Horizontal Boring Mills

Listing description

4.3" toshiba cnc horizontal boring mill

specifications
travels:
-x-axis (cross movement of table) ............ 2,500 mm (100")
-y-axis (vertical movement of spindle head) .. 2,000 mm (80")
-z-axis (longitudinal movement of column) .... 1,500 mm (60")
-w-axis (spindle extension) .................. 500 mm (20")
distance from:
table working surface ........................ 1,400 x 1,800 mm (55.1" x 70.9")
table loading capacity ....................... 10,000 kg (22,000 lbs)
table surface configuration (pitch to t-slots) 160 mm, size 22 mm
minimum table indexing angle (b- axis) ....... 0.0001 deg
spindle diameter ............................. 110 mm (4.3")
spindle speed range .......................... 6 to 4,000 min
milling spindle nose diameter ................ 225 mm (8.8")
type of spindle taper ........................ bt50
rapid traverse rate:
-x, y z ..................................... 18,000 mm (708.7 ipm)
-w ........................................... 6,000 (236.2 ipm)
-b ........................................... 720 degrees/min
feedrate ..................................... 1-10,000 mm (0.04-393.7 ipm)
type of tool shank ........................... mas bt50
type of retention knob ....................... mas p50t-1
tool storage capacity ........................ 38 tools
maximum tool diameter
-when adjacent pots are occupied ............. 125 mm (4.92")
-when adjacent pots are empty ................ 240 mm (9.44")
maximum tool length .......................... 400 mm (15.74")
maximum tool mass ............................ 25 kg (55 lbs)
spindle drive motor .......................... ac30/22 kw (40/30 hp)
positioning accuracy:
-x, y, z ..................................... +/-0.008 mm/full length (+/-0.00032/full length ipm)
-w ........................................... +/-0.010 mm/full length (+/-0.00040/full length ipm)
tool selection ............................... pot address random short-cut
floor space .................................. (236" x 236" x181")

equipped with:
-tosnuc 888.2 interactive cnc control with pendant functions
-flood-type coolant
-screw-type chip conveyor for z axis (2)
-scale feedback on all axis
-chip conveyor
-miscellaneous set up tooling
-renishaw rmp-60 probe
-table enclosure
-voltage requirement--200-220 volts

condition--very good
ways are unmarked and show virtually no wear,
inspect under power; low hours

This equipment is located in US