Listings similar to "Used Demag ERGOtech 200-840 Compact" 60

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Ca…

Mould opening/closing, injection, ejection, etc. are fine and smooth. There is backflow as a problem. It is not known whether it is possible to r…

Screw D65 / 863 cm3 / 1550 bars. Between columns 570 x 570 / trays 860 x 860. Mold thickness min 210 / max 730. Maximum ejector stroke 220. Total …

Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Clamp Force (t): 150 Screw Diameter (mm): 45 Max Shot Weight (…

Clamping force: 200 tons Distance between tie bars: 560x560 mm Clamping plates dimensions: 830 x 830 mm Mold Height min. / max. : 177 x 310 …

Machine: DEMAG EL EXIS S 300 / 720 -1450 Year: 2006 Control type: NC4 Number of hours: 42,000 Closing Closing force: 300 T Opening stroke: 67…

Clamping force: 50 t Tool height: 210 mm Opening distance: 400 mm Platten dimensions: 520 x 520 mm Clearance between tie bars: 355 x 355 mm Scre…

INJECTION UNIT Screw diameter: 60 mm Calculated injection volume: 763 cm³ Length / diameter ratio: L / D Pressure on the material: 1905 bars C…

Control type: NC4 Closing force: 300 T Opening stroke: 670 mm Between columns: 710 x 830 mm Mini / maxi mold: 330mm Max distance between plates:…

Used 370 Ton Demag Ergotech 330-1450 Injection Molding Machine Brand Demag Model Ergotech 330-1450 Year of Mfg 1995 Tonnage 370 Type Hydraulic…

INJECTION MOULDING MACHINE DEMAG DC320 with the following characteristics: Press: 350 ton Platens : 700x700mm Capacity: 2.5kg/shot The machin…

Model: AUTOMODEL-FU CHUN SHIN Screw Diameter (MM): T04260 Tie Bar H X V (MM): 28 Clamp (ton): 350 X 300 Year: 1998 PLC Model/ Controller: AUTOMO…

Machine: DEMAG 200T BI MAT 610H / 120 BI MAT Year: 2000 Control type: NC4 Number of hours: 31 500H Closing Closing force: 200T Opening stroke…

INJECTION UNIT Screw diameter: 45 / 25 mm Calculated injection volume: 323 / 61 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s …

Manufactured year 1997 Closing force 420 T Column passage 800 x 710 mm Minimum mold thickness 380 mm Maximum mold thickness 820 mm Opening stroke …

CLAMPING FORCE: 50 Tons SHOT SIZE: 3.32 oz. SCREW DIAMETER: 30mm TIE BAR SPACING: 14.5" x 14.5" PLATEN SIZE: 21.2" x 20.8" CLAMP STROKE: 1…

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 231 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

INJECTION UNIT Screw diameter: 50 mm Calculated injection volume: 442 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Demag Extra 1500-600 injection molding machine Clamping force 150 tons Machine in very good condition.

INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 323 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 168 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Control type: NC 4 Control Locking system: Knee TECHNICAL DATA Closing force: 1250 kN Clearance between columns: 475 mm x 450 mm The dimensions …

INJECTION UNIT Screw diameter: 60 mm Calculated injection volume: 763 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 1905 bars …

Model: FT 110 Screw Diameter (MM): 35 Tie Bar H X V (MM): 400 X 340 Clamp (ton): 110 Year: 1996 Shot Weight (gram): NA PLC Model/ Controller: P…

INJECTION UNIT Screw diameter: 22 mm Calculated injection volume: 42 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure on…

INJECTION UNIT Screw diameter: 50 mm Calculated injection volume: 442 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 168 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Type: Ergotech 50-270 Viva Year: 2003 Controller: NC 4 Control Clamping Type: Hydraulic Clamping Force: 500 kN Distance Betw. Tie-Bars Hx V: 3…

INJECTION UNIT Screw diameter: 30 mm Calculated injection volume: 106 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Used DEMAG 5000-5200 Injection moulding machine -CE- Visible in Italy 1999