Listings similar to "Used DEMAG Ergotech 8000-5200 Injection moulding machine" 60

Tie Bar Distance :860×860mm Screw Diameter :80mm Theoretical injection capacity : 1880㎝3 Injection mass (polystyrene) :173g (polyethylene) : 137…

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Ca…

Data sheet Brand: ARBURG Model: 630 S 2500-1300 Tonnage: 250 Year: 2000 Column passage: 630x630 Screw diameter: 55 Calculated injection volume…

Clamping force: 200 tons Distance between tie bars: 560x560 mm Clamping plates dimensions: 830 x 830 mm Mold Height min. / max. : 177 x 310 …

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 154 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

Clamping force: 50 t Tool height: 210 mm Opening distance: 400 mm Platten dimensions: 520 x 520 mm Clearance between tie bars: 355 x 355 mm Scre…

This Krauss Maffei 800-8000 MC Injection Moulding Machine was built in the year 1999 in Germany. It is equipped with a control unit of the same brand…

Krauss Maffei KM 650 - 3500 C2 Injection molding machine Year of production - 1999 Location - Poland MC control type 4 Unit crimping Crimping …

Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Clamp Force (t): 150 Screw Diameter (mm): 45 Max Shot Weight (…

This Krauss Maffei 800-8000 MC Injection Moulding Machine from 1998 was manufactured in Germany and is operated through a Krauss Maffei MC3F Control …

Machine: DEMAG EL EXIS S 300 / 720 -1450 Year: 2006 Control type: NC4 Number of hours: 42,000 Closing Closing force: 300 T Opening stroke: 67…

Machine: DEMAG 420T System 420/810 -3300 Year: 2008 Control type: NC4 Number of hours: 40,000 H Closing Closing force: 420T Opening stroke: 7…

INJECTION UNIT Screw diameter: 60 mm Calculated injection volume: 763 cm³ Length / diameter ratio: L / D Pressure on the material: 1905 bars C…

Brand : Billion Year : 1999 Type : HERCULE 3500/550 Clamping force : 550 T Screw diameter : 85 mm Between tie bar : 930 x 930 mm Sh…

Billion H6860/900T Injection Molding Machine The machine is located in France. Year 1996 Screw diameter 105 mm

Control type: NC4 Closing force: 300 T Opening stroke: 670 mm Between columns: 710 x 830 mm Mini / maxi mold: 330mm Max distance between plates:…

Demag Extra 1500-600 injection molding machine Clamping force 150 tons Machine in very good condition.

Used 370 Ton Demag Ergotech 330-1450 Injection Molding Machine Brand Demag Model Ergotech 330-1450 Year of Mfg 1995 Tonnage 370 Type Hydraulic…

Machine: DEMAG 200T BI MAT 610H / 120 BI MAT Year: 2000 Control type: NC4 Number of hours: 31 500H Closing Closing force: 200T Opening stroke…

INJECTION MOULDING MACHINE DEMAG DC320 with the following characteristics: Press: 350 ton Platens : 700x700mm Capacity: 2.5kg/shot The machin…

INJECTION UNIT Screw diameter: 45 / 25 mm Calculated injection volume: 323 / 61 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s …

INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 323 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

CLAMPING FORCE: 50 Tons SHOT SIZE: 3.32 oz. SCREW DIAMETER: 30mm TIE BAR SPACING: 14.5" x 14.5" PLATEN SIZE: 21.2" x 20.8" CLAMP STROKE: 1…

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 231 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

INJECTION UNIT Screw diameter: 50 mm Calculated injection volume: 442 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Control type: NC 4 Control Locking system: Knee TECHNICAL DATA Closing force: 1250 kN Clearance between columns: 475 mm x 450 mm The dimensions …

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 168 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

SANDRETTO 1100T MEGAT Type: 9208/1100 Year: 12/1998 Screw diameter: 135 mm - 7805 cm3 4 cores Passage between column: 1230 x 1230mm …

Manufactured year 1997 Closing force 420 T Column passage 800 x 710 mm Minimum mold thickness 380 mm Maximum mold thickness 820 mm Opening stroke …

Type: Ergotech 50-270 Viva Year: 2003 Controller: NC 4 Control Clamping Type: Hydraulic Clamping Force: 500 kN Distance Betw. Tie-Bars Hx V: 3…