Used Slicer line for cordons bleus

Listing description

This is a line of AERA slicers for the preparation of cordons bleus.

GENERAL TECHNICAL CHARACTERISTICS:
- Overall dimensions of the gangway (L x W x H): 8000 x 4700 x 3800 mm.
- Overall dimensions of the conveyor (L x W x H): 6400 x 1000 x 970 mm.
- Overall dimensions of a slicer (L x W x H): 1880 x 1030 x 2460 mm.
- Number of tracks: 4
- The maximum sound level of the line: 80 dba
- Line operation: continuous
- Capacity: 15000 products/h

COMPOSITION :
1 platform with access stairs
1 stuffing conveyor
3 ribbon slicers suspended under the catwalk
3 preparation tables on the bridge

FILLING CONVEYOR
- Overall dimensions (L x W x H): 6400 x 1000 x 970mm.
- Weight: 970 Kg
- Height of sliding plane: 960 +/- 50mm.
- Stainless steel tubular legs and cylinders
- Synchronous belt width 600mm.
- Lyre winding
- Pneumatically controlled belt quick release system
Piloting by servo-motor with management of a positioning register.
- Belt scrapers

SLICER
- Overall dimensions (L x W x H): 1880 x 1030 x 2460mm
- Weight: 1000 Kg
- Stainless steel frame: 20 mm.
- Casing by stainless steel panel with magnetic safety sensor and pneumatic locking during operation.

Compositions:
The slicer is equipped with 4 magazines consisting of:
- 4 conveyor belts with synchronous spikes controlled by a servomotor
- 4 chutes defined according to the products to be sliced
- Pneumatic control for disengaging the chutes from the belts for loading

CUTTING CART

- Cutting is ensured by a ribbon blade on 2 titanium 200 flywheels mounted on a titanium transverse piece
- The cutting carriage is guided by “Hepco inox” rails and rollers
- The cutting movement is controlled by a Sew Usocome Servo-reducer, a through shaft and two crank link systems
- The flywheels are driven by a Sew Usocome Gearmotor equipped with a transmission shaft and an expandable pulley allowing constant tension of the V-belt drive.
- A tensioning system with a torque limiter allows the tension to be correctly adjusted on the blade band.
- The cutting blade is lubricated by an automatic gun fed by a low pressure water network.

DELIVERY CONVEYOR:
- The reception and distribution of the slices is ensured by a two-ply polyurethane belt conveyor motorized by a Sew Usocome servo-reducer
- Removal of products by a saber with a diameter of 16 mm at the end of the conveyor
- Fast tape release system.
- Perforated sole to facilitate its cleaning.
- Conveyor entirely made of stainless steel.

This equipment is located in FR