Board thickness | 0.3937 in |
Edge thickness | 0.11811 in |
Feed advance | 11 m/min |
Sound-proof cabin | |
Glue tank | |
------------------- | |
Length x width x height | 3250.0 × 950.0 × 1250.0 |
Weight | lb |
Year: 1998
Edgebander Scm Ce Model Basic 2 Year 1998 With EndersPrice on request
Italy
Year:
Price on request
Czech Republic
Year: 1999
Hauteur max de la tranche 10-45mm, épaisseur des tranches 0,4-8mm, vitesse d alimentation 11m/minPrice on request
Czech Republic
Year: 1995
Price on request
Poland
Year:
Price on request
France
Year:
Price on request
France
Year:
Equipped with: Automatic strip & coil feed magazine, Teflon coated glue pot (heat up time 10 Min), (3) roll pressure unit w/pneumatic controls Workstations: Double motor front & rear end trim (0.3 HP - 12,000 RPM motor ea.) 5/16" (8 mm) Max. edge cap. 1-3/4" max. banding height 2-3/8" min. panel width and 6-/14" min. length Tilts 0° - 15° Top & bottom trims (0.8 HP - 12.000 RPM motor ea.) Top & bottom buffing unit (0.33 HP - 2,800 …Price on request
USA
Year: 1992
Used SCM Basic 2 Auto Edgebander; auto feed magazine for edge strips; auto loader for rolled edges & shear device for coiled material with thicknesses up to 1.2 mm; glue pot unit; horizontal pressure unit; end cutting unit with two independent motors; trimming unit tiltable from 0 to 15° complete with cutters; top & bottom buffing units; acoustic safety enclosure. Very clean machine in good condition. 230 Volt, 3 Phase. Replaced pneumatic cylinder, thermocouple, flow regulator valve, proximity switch, spring, …Price on request
USA
Year: 1998
The machine was renewed and tested at our workshop and is in realy good condition. Acuracy is not a question. MACHINE PARTS: - Gluepot was disasembled and cleaned - End cutting units - pair of edge scraping units - brushes The machine was tested and calibrated by our own service department.Price on request
Slovenia
Year:
SCM BASIC 2 edgebander Side width min: 8 mm. Maximum width: 140 mm edge thickness min: 0, 4mm Max edge thickness: 3 mm automatic belt feeder Gluing unit with melter for adhesive (heating time 10 min). Tilting Refector Fixed Rebel Group, Tilting Rebel Group, Brushes Group and Shear GroupPrice on request
Spain
Year:
Specifications Model: Basic 2 3 Phase 220 V 60 Hz Made in ItalyPrice on request
Canada
Year:
BORDATRICE SCM MOD. BASIC 2 working height mm. 10-45 thickness of rolled edges mm. 0.4-1.2 thickness of edges in strips mm. 0.4 to 8 width min. Working for rolled edges mm. 60 Working length min mm. 160 tiltable trimming group trimming unit Automatic loader of edges group glue pot WOTPrice on request
Italy
Year:
Price on request
Italy
Year: 1996
EDGEBANDER SCM BASIC 2 USEDPrice on request
Italy
Year:
BORDATRICE SCM BASIC 2 EC GROUP SLICE ABS ROLLER TIRE PRESSURE DOUBLE Trimming 0/15 ° Trimming / CHAMFERING DOUBLES 0/15 ° BRUSHES REBUILT WITH GLUE NEW GROUPPrice on request
Italy
Year:
EDGE BANDER SCM BASIC 2Price on request
Italy
Year:
Edge banding machinePrice on request
France
Year:
Description: BORDATRICE SCM MOD. BASIC 2 working height mcm. 10-45 thickness of rolled edges mm. 0.4-1.2 thickness of edges in strips mm. 0.4 to 8 width min. work for rolled edges mm. 60 min length of work mm. 140 WOTPrice on request
Italy
Year: 1995
SCM Basic 2 One-sided edge 5/16 (8 mm). The maximum edge, 140 mm (5-1 / 2) min. the width of the panel and the length of the minimum length of 200 mm (7-15 / 16) automatic tape feeder and coil feeder adhesive for Teflon coated (heating time 10 min) cover 1.2 mm guillotine 3-roller pressure block with pneumatic Dual front and rear engine cover (0.3 HP - engine with a speed of 12,000 rpm), slopes 0 ° -15 °; - …Price on request
Serbia
Year: 1995
Single-sided edge banding machine SCM Basic 2. Side width min: 8 mm. Maximum width: 140 mm Min edge thickness: 0.4mm Thickness max edge: 3 mm automatic tape feeder Gluing group with melter for adhesive (heating time 10 min). Tilting tilt Fixed reamer group, tilt group and brush group GuillotinePrice on request
Spain
Year: 1997
SCM edgebander model BASIC 2 composition "B" used: - useful panel thickness 10 - 45mm -loader for roll material and 0,4 - 1,2mm shear -loader for massive strips max 8mm - bonding with hot melt glue pot - double inclinable headers -Tilting spin processors, quick-release motors -free space for other groups -spazzole - speed of advancement 11 mt / min CEPrice on request
Italy