Specifications

Table length  in
Table width  in
Manual No
CNC Yes
Type of CNC
Max. longitudinal travel 13.77953 in
Cross travel 18.50394 in
Max. height from spindle to table 3.93701 in
Wheel diameter 5.90551 in
Max. wheel speed 10500 u/mn
Spindle power 9.387 HP
Hydraulic motor 33.525 HP
-------------------
worked hours
hours under power
state good
At local norms ---------
status visible
Datasheet Walter Helitronic Power

Description

WALTER - HELITRONIC POWER - 2003/ 2019
- software WALTER WINDOW MODE + TOOLS STUDIO
- toolroom grinder
- retrofit in 2019
- used good condition
- can be tested under power
MORE description:
- stronger A axis
- 24 kW main spindle motor
- big GRUNDFOSS pump with frequency changer for cooling oil (viscosity 4)
- cooling oil filter
- cooler for cooling oil
- exhaust and filter on top of the machine
- extra 50 bar cooling access possibility
- depending on final agreed price also some grinding clamping shafts for main spindle (at full price max 20 pieces)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2008
Offers online 58
Last activity July 11, 2025

Description

WALTER - HELITRONIC POWER - 2003/ 2019
- software WALTER WINDOW MODE + TOOLS STUDIO
- toolroom grinder
- retrofit in 2019
- used good condition
- can be tested under power
MORE description:
- stronger A axis
- 24 kW main spindle motor
- big GRUNDFOSS pump with frequency changer for cooling oil (viscosity 4)
- cooling oil filter
- cooler for cooling oil
- exhaust and filter on top of the machine
- extra 50 bar cooling access possibility
- depending on final agreed price also some grinding clamping shafts for main spindle (at full price max 20 pieces)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Table length  in
Table width  in
Manual No
CNC Yes
Type of CNC
Max. longitudinal travel 13.77953 in
Cross travel 18.50394 in
Max. height from spindle to table 3.93701 in
Wheel diameter 5.90551 in
Max. wheel speed 10500 u/mn
Spindle power 9.387 HP
Hydraulic motor 33.525 HP
-------------------
worked hours
hours under power
state good
At local norms ---------
status visible

About this seller

Client type Reseller
Active since 2008
Offers online 58
Last activity July 11, 2025

Here is a selection of similar machines

WALTER HELITRONIC POWER Tool grinding machine