Specifications

Length between centers 157.48031 in
Max. turning diameter 43.30709 in
Center height 16.14173 in
Ø above the bed 32.28346 in
Ø above transversing slide 23.62205 in
Diameter in the gap 43.30709 in
Faceplate diameter 31.49606 in
Spindle bore 3.14961 in
Turning speed 487 rpm
Overhauled no
Tailstock no
Steady no
Type of chuck 3 jaw
-------------------
worked hours
hours under power
state as-is, where-is
At local norms ---------
status visible

Description

Center height: 410 mm
Center distance: 4000 mm
Spindle hole: 80 mm
Turning diameter over bed: 820 mm
Turning diameter over slide: 600 mm
Turning diameter over recess: 1100 mm
Speeds: 9.5-487 rpm - 18 steps

Accesories: 1 three-jaw chuck Ø 500 mm with interchangeable jaws
1 four-jaw face plate Ø 800 mm with interchangeable jaws
1 chuck flange Ø 400 mm
2 fixed steady rests
1 quadruple tool
post 1 fixed center with reducing sleeve
2 live center
1 machine light
1 coolant system
operating key

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2008
Offers online 34
Last activity Aug. 8, 2025

Description

Center height: 410 mm
Center distance: 4000 mm
Spindle hole: 80 mm
Turning diameter over bed: 820 mm
Turning diameter over slide: 600 mm
Turning diameter over recess: 1100 mm
Speeds: 9.5-487 rpm - 18 steps

Accesories: 1 three-jaw chuck Ø 500 mm with interchangeable jaws
1 four-jaw face plate Ø 800 mm with interchangeable jaws
1 chuck flange Ø 400 mm
2 fixed steady rests
1 quadruple tool
post 1 fixed center with reducing sleeve
2 live center
1 machine light
1 coolant system
operating key

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Length between centers 157.48031 in
Max. turning diameter 43.30709 in
Center height 16.14173 in
Ø above the bed 32.28346 in
Ø above transversing slide 23.62205 in
Diameter in the gap 43.30709 in
Faceplate diameter 31.49606 in
Spindle bore 3.14961 in
Turning speed 487 rpm
Overhauled no
Tailstock no
Steady no
Type of chuck 3 jaw
-------------------
worked hours
hours under power
state as-is, where-is
At local norms ---------
status visible

About this seller

Client type Reseller
Active since 2008
Offers online 34
Last activity Aug. 8, 2025

Here is a selection of similar machines

HEID DN40 heavy duty lathe