Specifications

Turning length 23.63 in
Turning Ø 13.39 in
Ø above the bed 22.84 in
Type of CNC Okuma OSP-P200L CNC Control
X-axis 10.24 in
Z-axis 26.97 in
Spindle taper A2-6
Spindle bore 3.15 in
Number of turrets 12
Turning speed 5000 rpm
Spindle motor power 40.23 HP
Tailstock yes
Bar feeder no
-------------------
Length x width x height 116.0 × 85.0 × 83.0
Weight 14960 lb
worked hours
hours under power
state good
At local norms ---------
status under power

Description

Location: Lake Elsinore, CA
SKU: 112590
Make/Model: Okuma Simul Turn LU300-M
Year: 2008
Condition: Used – Good

*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*

Equipped With:
Okuma OSP-P200L CNC Control
12 Station Upper Live Tool Turret with Tool Holders
8 Station Lower Turret with Tool Holders
Servo Controlled Full C-Axis on Spindle
Collet Chuck
Rigid Tapping
Foot Operated Control for Chuck
Coolant System
Tool Pre-setter
Chip Conveyor
Tailstock
(2) Milling Tool Holders (14) Static Tool Holders (Equipped on Turrets as shown in the pictures)

Capacity:
Max Turning Diameter Upper Turret: 13.39″ ?
Max Turning Diameter Lower Turret: 8.66″
Max Swing Over Bed : 22.84″
Max Turning Length: 23.63″
Max Bar Capacity : 2.46″

Travels:
X1 Axis Travel Upper : 10.24″ ?
X2 Axis Travel Lower : 6.30″
Z1 Axis Travel Upper : 26.97″
Z2 Axis Travel Lower : 24.22″
C Axis: 360° (0.001°)

Feedrate:
X Axis: 984 IPM Rapid Traverse
Z Axis: 1181 IPM Rapid Traverse

Spindle:
Main Spindle Bore: 3.15″
Main Spindle Nose: A2-6
Main Spindle Speed: 50-5000 RPM
Main Spindle Power: 30 HP

Turret:
Upper Turret Capacity: 12 Stations
Lower Turret Capacity: 8 Stations
Live Tool Speed: 6,000 RPM
Live Tool Motor : 5 HP

Tailstock:
Tailstock Taper: MT-5
Quill Diameter: 3.54″
Quill Travel: 4.72″

General:
Power Source: AC 220v/480v / 3-Phase / 60 Hz
Power Requirement: 29.9 kva
Overall Dimensions: 116″ x 85″ x 83″ High
Weight: 14,960 lbs Approx.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2024
Offers online 93
Last activity July 11, 2025

Description

Location: Lake Elsinore, CA
SKU: 112590
Make/Model: Okuma Simul Turn LU300-M
Year: 2008
Condition: Used – Good

*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*

Equipped With:
Okuma OSP-P200L CNC Control
12 Station Upper Live Tool Turret with Tool Holders
8 Station Lower Turret with Tool Holders
Servo Controlled Full C-Axis on Spindle
Collet Chuck
Rigid Tapping
Foot Operated Control for Chuck
Coolant System
Tool Pre-setter
Chip Conveyor
Tailstock
(2) Milling Tool Holders (14) Static Tool Holders (Equipped on Turrets as shown in the pictures)

Capacity:
Max Turning Diameter Upper Turret: 13.39″ ?
Max Turning Diameter Lower Turret: 8.66″
Max Swing Over Bed : 22.84″
Max Turning Length: 23.63″
Max Bar Capacity : 2.46″

Travels:
X1 Axis Travel Upper : 10.24″ ?
X2 Axis Travel Lower : 6.30″
Z1 Axis Travel Upper : 26.97″
Z2 Axis Travel Lower : 24.22″
C Axis: 360° (0.001°)

Feedrate:
X Axis: 984 IPM Rapid Traverse
Z Axis: 1181 IPM Rapid Traverse

Spindle:
Main Spindle Bore: 3.15″
Main Spindle Nose: A2-6
Main Spindle Speed: 50-5000 RPM
Main Spindle Power: 30 HP

Turret:
Upper Turret Capacity: 12 Stations
Lower Turret Capacity: 8 Stations
Live Tool Speed: 6,000 RPM
Live Tool Motor : 5 HP

Tailstock:
Tailstock Taper: MT-5
Quill Diameter: 3.54″
Quill Travel: 4.72″

General:
Power Source: AC 220v/480v / 3-Phase / 60 Hz
Power Requirement: 29.9 kva
Overall Dimensions: 116″ x 85″ x 83″ High
Weight: 14,960 lbs Approx.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Turning length 23.63 in
Turning Ø 13.39 in
Ø above the bed 22.84 in
Type of CNC Okuma OSP-P200L CNC Control
X-axis 10.24 in
Z-axis 26.97 in
Spindle taper A2-6
Spindle bore 3.15 in
Number of turrets 12
Turning speed 5000 rpm
Spindle motor power 40.23 HP
Tailstock yes
Bar feeder no
-------------------
Length x width x height 116.0 × 85.0 × 83.0
Weight 14960 lb
worked hours
hours under power
state good
At local norms ---------
status under power

About this seller

Client type Reseller
Active since 2024
Offers online 93
Last activity July 11, 2025

Here is a selection of similar machines

Okuma Simul Turn LU300-M Multi Axis CNC Turning Center