Strojtos Lipník a.s. VMC 50 B Vertical machining center Hot deal

24,000 $

Make an offer

Specifications

Axis X 39.37008 in
Axis Y 19.68504 in
Axis Z 19.68504 in
Rotary table (4th axis) no
Type of CNC iTNC530
Table length 43.30709 in
Table width 19.68504 in
Max. part weight 1542.8 lb
Number of tool pockets 12
Spindle taper ISO 40
Max. spindle speed 9000 rpm
Spindle motor power 13.41 HP
-------------------
Length x width x height 3200.0 × 2140.0 × 3200.0
Weight 11460.8 lb
worked hours
hours under power
state good
At local norms yes
status visible

Description

Machining centre

Machining centre VMC 50 Strojtos Lipník

- Spindle cone ISO 40 / DIN 69 872A
- direct measuring
- temperature compensation
- TNC 530 control system
- tool magazine * 12
- Schneberger linear guides
- Steinmayer ball screws
- chip tray - extractor
- accompanying documentation
- CE declaration

- 10kW / 9000 rpm
- 12 tool tray
- chip conveyor
- pump (new)
- workpiece probe BLUM TC 50 ! (infrared) (2019)
- backup PLC
- LAN port 10/100Mbit recording from PC via TNCremo
- HR410 hand wheel

run-up: 1000x500x500mm
speed: 9000 rpm
max. feed: 25000 mm/min



+ CE declaration of conformity
+ manual in CZ
+ accuracy protocol (ballbar)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type User – small or medium company
Active since 2013
Offers online 13
Last activity May 17, 2025

Description

Machining centre

Machining centre VMC 50 Strojtos Lipník

- Spindle cone ISO 40 / DIN 69 872A
- direct measuring
- temperature compensation
- TNC 530 control system
- tool magazine * 12
- Schneberger linear guides
- Steinmayer ball screws
- chip tray - extractor
- accompanying documentation
- CE declaration

- 10kW / 9000 rpm
- 12 tool tray
- chip conveyor
- pump (new)
- workpiece probe BLUM TC 50 ! (infrared) (2019)
- backup PLC
- LAN port 10/100Mbit recording from PC via TNCremo
- HR410 hand wheel

run-up: 1000x500x500mm
speed: 9000 rpm
max. feed: 25000 mm/min



+ CE declaration of conformity
+ manual in CZ
+ accuracy protocol (ballbar)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Axis X 39.37008 in
Axis Y 19.68504 in
Axis Z 19.68504 in
Rotary table (4th axis) no
Type of CNC iTNC530
Table length 43.30709 in
Table width 19.68504 in
Max. part weight 1542.8 lb
Number of tool pockets 12
Spindle taper ISO 40
Max. spindle speed 9000 rpm
Spindle motor power 13.41 HP
-------------------
Length x width x height 3200.0 × 2140.0 × 3200.0
Weight 11460.8 lb
worked hours
hours under power
state good
At local norms yes
status visible

About this seller

Client type User – small or medium company
Active since 2013
Offers online 13
Last activity May 17, 2025

Here is a selection of similar machines

Strojtos Lipník a.s. VMC 50 B Vertical machining center